
VVDED397047US R8/01 ALTIVAR
58 Keypad Display
08/01 Chapter 2 — Menus
© 1998–2001 Schneider Electric All Rights Reserved
27
2—ADJUST MENU
The Adjust menu is accessible when the access locking switch is set to
either or . Adjustment parameters can be modified whether the
drive controller is commanding the motor to run or not, however, it is
recommended that you make all adjustments with the motor stopped.
There are two types of adjustment parameters: parameters which are
always accessible (fixed adjustment parameters), and parameters which
may be accessible depending on:
• The macro-configuration selected
• The presence of an I/O extension card
• The input and output reassignments
The fixed set of adjustment parameters, shown in Table 6 beginning on
page 28, are accessible in every macro-configuration.
PARAMETER CHANGES WHILE MOTOR IS RUNNING
Changes made to adjustment parameters while the motor is running
may cause unintended equipment action. When changing adjustment
parameters, ensure that the motor is stopped.
Failure to follow this instruction can result in death, serious
injury, or equipment damage.
WARNING
Comentarios a estos manuales