Schneider Electric Altivar 58 VW3-A58101 Manual de usuario descargar pdf (Pagina 17)

VVDED397047US R8/01 ALTIVAR



58 Keypad Display

08/01 Chapter 1 — Overview

ACCESS LEVELS

Figure 5: Rear View of Keypad Display

The position of the access locking switch on the back of the programming

keypad display allows three levels of access to the menus. Access to the

menus can also be prevented by using an access code (see the 7—File

menu on page 79).

Locked Position – Display Mode: use when the motor is running

to prevent modifications to the drive controller programming.

• You can select the dialog language in the LANGUAGE menu.

• You can display the macro-configuration or the pre-programmed

values for the selected application in the MACRO-CONFIG menu.

• You can display the voltage and power rating of your drive controller in

the IDENTIFICATION menu.

• You can display the electrical values, the operational status, or fault in

the 1—DISPLAY menu.

Partial Lock Position – Display and Adjustment Modes: this

level is used during startup for access to basic setup parameters.

• You can do everything listed above.

• You can use the 2—ADJUST menu to adjust parameters which are

accessible when the motor is running.

Connector (9-pin SUB-D male):

- for direct connection to the drive controller

- for remote mounting, the keypad display can be

connected using a cable provided in kit

VW3A58103

Switch for access locking:

- locked : display mode only, adjustment and

position configuration parameters not

accessible

- partial : display mode and adjustment

lock parameters accessible

position

- total : display mode, adjustment and

unlock configuration parameters accessible

position

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 111 112

Sin comentarios

Schneider Electric Altivar 58 VW3-A58101 Manual de usuario Pagina 17