Schneider Electric ALTIVAR 58 TRX Guía de instalación descargar pdf (Pagina 92)

Chapter 2—Menus VVDED397047USR6/03

7—Files Menu 06/2003

• If storing a file, the display automatically returns to the FOt

(Operation Type) parameter after storing the file.

• If the FOt parameter is set to REC, a second confirmation must be

made:

The display indicates:

Press ENT to confirm.

The display then indicates:

Press ENT to confirm.

The display automatically returns to the FOt parameter, set to No.

Access Code

The drive controller configuration can be protected by an access code

(password).

NOTE: Use this parameter with caution. It can prohibit access to

parameters. Carefully note and save any modification to this

parameter.

The access code is expressed with four digits. The first three are

user-assigned and do not affect access to the menus. The fourth digit

can range from 0 to 9 and determines which menus can be accessed.

See Table 24 for an explanation of the last digit codes.

For example, if the access code is “2337”, display of the menus 2, 3,

4, 5, 6, 7, and 8 is allowed, but modification is not allowed.

Validate? ENT/ESC

CHG

Wiring OK? ENT/ESC

CHG

Table 23: Access Code

Parameter Code Description

Factory

setting

Config. Code

COd

Configuration code used as an access

code.

0000

Figure 22: Access Code

8888

this number gives the

authorized level of access

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 125 126

Sin comentarios

Schneider Electric ALTIVAR 58 TRX Guía de instalación Pagina 92