Schneider Electric ALTIVAR 58 TRX Guía de instalación descargar pdf (Pagina 25)

VVDED397047USR6/03 Chapter 2—Menus

06/2003 Macro-Configuration Menu

Transferring a file created for a drive controller without an I/O

extension card to a drive controller with an I/O extension card may

result in unexpected I/O assignment. Verify all I/O assignments. Do

not assign I/O functions that are not used in the application.

Modification of the macro-configuration requires two confirmations

since it automatically changes the function assignments. When a

change to the macro-configuration is requested the following screen

is displayed:

WARNING

UNINTENDED EQUIPMENT OPERATION

LI1 has priority:

• If LI1 is closed while LI2 is active, the controller will respond to

LI1.

• If the LI1 input is lost while LI2 is active, the controller will respond

to LI2 and reverse directions.

The logic inputs must be programmed appropriately for the

application to prevent the motor from spinning in an unintended

direction.

Failure to follow this instruction can result in death or serious

injury.

Figure 9: Macro-Configuration Validation

Validate? ENT/ESC

CHG

Press ENT to proceed with change

Press ESC to return to the previous configuration

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 125 126

Sin comentarios

Schneider Electric ALTIVAR 58 TRX Guía de instalación Pagina 25