Schneider Electric ALTIVAR 58 TRX Guía de instalación descargar pdf (Pagina 34)

Chapter 2—Menus VVDED397047USR6/03

2—Adjust Menu 06/2003

Jump Freq.3- Hz JF3

Third skip frequency: same

function as JPF, for a third

frequency value.

0 to HSP 0 Hz

Machine Coef. USC

Machine speed coefficient. 0.01 to 100.0 1.00

Coefficient applied to rFr permitting the display of machine

speed by the parameter USP. USP = rFr x USC

LSP Time - s tLS

Low speed run time.

0.0 to

999.9 s

After operation at LSP for the amount of time defined by

tLS, the motor is automatically commanded to stop. The

motor restarts if the frequency reference is greater than

LSP, if a run command continues to be present. “0” means

that no time period is set.

Table 6: 2—Fixed Set of Adjustment Parameters (continued)

Parameter Code Description

Adjustment

Range

Factory

Setting

[1]

= drive controller constant torque output current rating shown on the drive controller

nameplate.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 125 126

Sin comentarios

Schneider Electric ALTIVAR 58 TRX Guía de instalación Pagina 34