Schneider Electric Mupgrade Utility Guía de instalación descargar pdf (Pagina 104)

Configuring the Conext Battery Monitor

975-0720-01-01 3–39

This manual is for use by qualified personnel only

Battery Temperature Configuration

Battery temperature configuration allows you to configure the temperature

settings of your Battery Monitor.

Auto-

Synchronization

Sensitivity

Changes sensitivity of the auto-sync function. If it takes too long to activate the

synchronization function, lower this value. If it synchronizes too early, increase this

value for a later synchronization.

Peukert

Exponent

Represents effect of reducing battery capacity at higher discharge rates.

Self Discharge

Rate

Rate at which the battery loses capacity by itself, when it is not used.

Charge

Efficiency

Factor Mode

Ratio between the energy removed from a battery during discharge & the energy

used during charging to restore original capacity.

Time

Remaining

Average Filter

Represents the effect of reducing battery capacity at higher discharge rates.

Table 3-15 Battery Configuration Settings

Setting Description

Figure 3-33 Battery Monitor Battery Temperature Configuration

Table 3-16 Battery Temperature Settings

Setting Description

Nominal

Temperature

The temperature at which the battery manufacturer rates the battery’s capacity.

Default

Temperature

Default temperature setting.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 129 130

Sin comentarios

Schneider Electric Mupgrade Utility Guía de instalación Pagina 104